Tube Tech produces a vast range of cupro nickel tubes to satisfy all customer requirements in terms of outer diameter, wall thickness and tempers to suit the intended applications. The cupro nickel tubes are available in a variety of combinations, the main combinations manufactured by Tube Tech are:

Our range of cupro nickel tubes are :

This alloy has very high erosion and corrosion resistance. It has very high weld ability, easy for installation and high antifouling properties against sea microorganisms. Relatively high iron content provides better impingement attack resistance. The alloy is unique to stress corrosion cracking. This form of copper alloy gives the best service life under the most adverse conditions.

Tube Tech has excelled in providing high quality integral low copper fin tubes suitable for the situations which require extended surface but the space availability and type of heat exchanger dictate otherwise because of their enhanced surface fin tubes provide better heat transfer performance which allows our customers to either reduce the size of the heat exchanger or increase its performance. Fin tubes are available in tube diameters of 15.88 mm, 19.05 mm & 25.4 mm with wall thickness of 1.00 mm and above. The fin density ranges from 19 fins per inch to 26 fins per inch. The copper fin tube we manufacture are designed to meet the most efficient and durable thermal performance for the most challenging situations and long lasting service life. Depending upon the specific requirement tube ends as well as a portion on its middle may be left unfinned for fixing the tube on the tube plate as shown in figures 1 & 2.

We offer wide range of copper fittings which provide an economic and efficient method of changing directions in a wide spectrum of domestic and commercial applications ranging from air conditioning, refrigeration, heating, fluid distribution, air pressure lines and plumbing etc. Our fittings have no rough surfaces, present a neat appearance, heat more rapidly and provide better flexibility to the installer to install and join the copper tube at appropriate place. We manufacture copper fittings in a variety of standard sizes between 6.00mm and 42.00mm. The sizes are measured inside diameter (I.D). The most commonly used copper fittings manufactured by Tube Tech are grouped as under.

Elbows
Used to change the direction of the pipe and have a close radius to fit in the tightest possible space. The most commonly used elbows are 90 and 45 radius elbow. Many other varieties are available for specific requirements.

U Bends
Used to accommodate the return flow of the coolant and provides a 180 turn in a much smaller space. We manufacture both expanded as well as plain u-bends for condensers and evaporators.

Couplings
Used to connect two identical size tubes together. The coupling used to connect two pipes of different diameter is called a reducing coupling.

Tee
Tee is a fitting in the shape of a 'T' where the top of it is the continuous pipe run and the vertical section is a branch connected to it. This shape of fittings offers the most varieties than any other type.